# Evidence

WARNING

Paloma's evidence module inherits from Cosmos SDK's evidence (opens new window) module. This document is a stub and covers mainly important Paloma-specific notes about how it is used.

The evidence module allows arbitrary evidence of misbehavior, such as equivocation and counterfactual signing, to be submitted and handled.

Typically, standard evidence handling expects the underlying consensus engine, Tendermint, to automatically submit evidence when it is discovered by allowing clients and foreign chains to submit more complex evidence directly. The evidence module operates differently.

All concrete evidence types must implement the Evidence interface contract. First, submitted Evidence is routed through the evidence module's Router, where it attempts to find a corresponding registered Handler for that specific Evidence type. Each Evidence type must have a Handler registered with the evidence module's keeper for it to be successfully routed and executed.

Each corresponding handler must also fulfill the Handler interface contract. The Handler for a given Evidence type can perform any arbitrary state transitions, such as slashing, jailing, and tombstoning.

# Concepts

# Evidence

Any concrete type of evidence submitted to the module must fulfill the following Evidence contract. Not all concrete types of evidence will fulfill this contract in the same way, and some data might be entirely irrelevant to certain types of evidence. An additional ValidatorEvidence, which extends Evidence, has also been created to define a contract for evidence against malicious validators.

// Evidence defines the contract which concrete evidence types of misbehavior
// must implement.
type Evidence interface {
	proto.Message

	Route() string
	Type() string
	String() string
	Hash() tmbytes.HexBytes
	ValidateBasic() error

	// Height at which the infraction occurred
	GetHeight() int64
}

// ValidatorEvidence extends Evidence interface to define contract
// for evidence against malicious validators
type ValidatorEvidence interface {
	Evidence

	// The consensus address of the malicious validator at time of infraction
	GetConsensusAddress() sdk.ConsAddress

	// The total power of the malicious validator at time of infraction
	GetValidatorPower() int64

	// The total validator set power at time of infraction
	GetTotalPower() int64
}

# Registration and handling

First, the evidence module must know about all the types of evidence it is expected to handle. Register the Route method in the Evidence contract with a Router as defined below. The Router accepts Evidence and attempts to find the corresponding Handler for the Evidence via the Route method.

type Router interface {
  AddRoute(r string, h Handler) Router
  HasRoute(r string) bool
  GetRoute(path string) Handler
  Seal()
  Sealed() bool
}

As defined below, the Handler is responsible for executing the entirety of the business logic for handling Evidence. Doing so typically includes validating the evidence, both stateless checks via ValidateBasic and stateful checks via any keepers provided to the Handler. Additionally, the Handler may also perform capabilities, such as slashing and jailing a validator. All Evidence handled by the Handler must be persisted.

// Handler defines an agnostic Evidence handler. The handler is responsible
// for executing all corresponding business logic necessary for verifying the
// evidence as valid. In addition, the Handler may execute any necessary
// slashing and potential jailing.
type Handler func(sdk.Context, Evidence) error

# State

The evidence module only stores valid submitted Evidence in state. The evidence state is also stored and exported in the evidence module's GenesisState.

// GenesisState defines the evidence module's genesis state.
message GenesisState {
  // evidence defines all the evidence at genesis.
  repeated google.protobuf.Any evidence = 1;
}

# Messages

# MsgSubmitEvidence

Evidence is submitted through a MsgSubmitEvidence message:

// MsgSubmitEvidence represents a message that supports submitting arbitrary
// Evidence of misbehavior such as equivocation or counterfactual signing.
message MsgSubmitEvidence {
  string              submitter = 1;
  google.protobuf.Any evidence  = 2;
}

The Evidence of a MsgSubmitEvidence message must have a corresponding Handler registered with the evidence module's Router to be processed and routed correctly.

Given the Evidence is registered with a corresponding Handler, it is processed as follows:

func SubmitEvidence(ctx Context, evidence Evidence) error {
  if _, ok := GetEvidence(ctx, evidence.Hash()); ok {
    return sdkerrors.Wrap(types.ErrEvidenceExists, evidence.Hash().String())
  }
  if !router.HasRoute(evidence.Route()) {
    return sdkerrors.Wrap(types.ErrNoEvidenceHandlerExists, evidence.Route())
  }

  handler := router.GetRoute(evidence.Route())
  if err := handler(ctx, evidence); err != nil {
    return sdkerrors.Wrap(types.ErrInvalidEvidence, err.Error())
  }

  ctx.EventManager().EmitEvent(
		sdk.NewEvent(
			types.EventTypeSubmitEvidence,
			sdk.NewAttribute(types.AttributeKeyEvidenceHash, evidence.Hash().String()),
		),
	)

  SetEvidence(ctx, evidence)
  return nil
}

Valid submitted Evidence of the same type must not already exist. The Evidence is routed to the Handler and executed. If no error in handling the Evidence occurs, an event is emitted, and it is persisted to state.

# Events

The evidence module emits the following handler events:

# MsgSubmitEvidence

Type	Attribute Key	Attribute Value
submit_evidence	evidence_hash	{evidenceHash}
message	module	evidence
message	sender	{senderAddress}
message	action	submit_evidence

# BeginBlock

# Evidence handling

Tendermint blocks can include Evidence (opens new window) that indicates whether a validator acted maliciously. The relevant information is forwarded to the application as ABCI Evidence in abci.RequestBeginBlock so that the validator can be punished accordingly.

# Equivocation

Currently, the SDK handles two types of evidence inside the ABCI BeginBlock:

DuplicateVoteEvidence,
LightClientAttackEvidence.

The evidence module handles these two evidence types the same way. First, the SDK converts the Tendermint concrete evidence type to a SDK Evidence interface by using Equivocation as the concrete type.

// Equivocation implements the Evidence interface.
message Equivocation {
  int64                     height            = 1;
  google.protobuf.Timestamp time              = 2;
  int64                     power             = 3;
  string                    consensus_address = 4;
}

For an Equivocation submitted in block to be valid, it must meet the following requirement:

Evidence.Timestamp >= block.Timestamp - MaxEvidenceAge

where:

Evidence.Timestamp is the timestamp in the block at height Evidence.Height.
block.Timestamp is the current block timestamp.

If valid Equivocation evidence is included in a block, the validator's stake is reduced by SlashFractionDoubleSign, as defined by the slashing module. The reduction is implemented at the point when the infraction occurred instead of when the evidence was discovered. The stake that contributed to the infraction is slashed, even if it has been redelegated or started unbonding.

Additionally, the validator is permanently jailed and tombstoned so that the validator cannot re-enter the validator set again.

`Equivocation` evidence handling code

func (k Keeper) HandleEquivocationEvidence(ctx sdk.Context, evidence *types.Equivocation) {
	logger := k.Logger(ctx)
	consAddr := evidence.GetConsensusAddress()

	if _, err := k.slashingKeeper.GetPubkey(ctx, consAddr.Bytes()); err != nil {
		// Ignore evidence that cannot be handled.
		//
		// NOTE: Developers used to panic with:
		// `panic(fmt.Sprintf("Validator consensus-address %v not found", consAddr))`,
		// but this couples the expectations of the app to both Tendermint and
		// the simulator.  Both are expected to provide the full range of
		// allowable but none of the disallowed evidence types.  Instead of
		// getting this coordination right, it is easier to relax the
		// constraints and ignore evidence that cannot be handled.
		return
	}

	// calculate the age of the evidence
	infractionHeight := evidence.GetHeight()
	infractionTime := evidence.GetTime()
	ageDuration := ctx.BlockHeader().Time.Sub(infractionTime)
	ageBlocks := ctx.BlockHeader().Height - infractionHeight

	// Reject evidence if the double-sign is too old. Evidence is considered stale
	// if the difference in time and number of blocks is greater than the allowed
	// parameters defined.
	cp := ctx.ConsensusParams()
	if cp != nil && cp.Evidence != nil {
		if ageDuration > cp.Evidence.MaxAgeDuration && ageBlocks > cp.Evidence.MaxAgeNumBlocks {
			logger.Info(
				"ignored equivocation; evidence too old",
				"validator", consAddr,
				"infraction_height", infractionHeight,
				"max_age_num_blocks", cp.Evidence.MaxAgeNumBlocks,
				"infraction_time", infractionTime,
				"max_age_duration", cp.Evidence.MaxAgeDuration,
			)
			return
		}
	}

	validator := k.stakingKeeper.ValidatorByConsAddr(ctx, consAddr)
	if validator == nil || validator.IsUnbonded() {
		// Defensive: Simulation doesn't take unbonding periods into account, and
		// Tendermint might break this assumption at some point.
		return
	}

	if ok := k.slashingKeeper.HasValidatorSigningInfo(ctx, consAddr); !ok {
		panic(fmt.Sprintf("expected signing info for validator %s but not found", consAddr))
	}

	// ignore if the validator is already tombstoned
	if k.slashingKeeper.IsTombstoned(ctx, consAddr) {
		logger.Info(
			"ignored equivocation; validator already tombstoned",
			"validator", consAddr,
			"infraction_height", infractionHeight,
			"infraction_time", infractionTime,
		)
		return
	}

	logger.Info(
		"confirmed equivocation",
		"validator", consAddr,
		"infraction_height", infractionHeight,
		"infraction_time", infractionTime,
	)

	// To retrieve the stake distribution which signed the block, subtract ValidatorUpdateDelay from the evidence height.
	// Note, that this *can* result in a negative "distributionHeight", up to
	// -ValidatorUpdateDelay, i.e. at the end of the
	// pre-genesis block (none) = at the beginning of the genesis block.
	// That's fine since this is just used to filter unbonding delegations & redelegations.
	distributionHeight := infractionHeight - sdk.ValidatorUpdateDelay

	// Slash validator. The `power` is the int64 power of the validator as provided
	// to/by Tendermint. This value is validator.Tokens as sent to Tendermint via
	// ABCI, and now received as evidence. The fraction is passed in to separately
	// to slash unbonding and rebonding delegations.
	k.slashingKeeper.Slash(
		ctx,
		consAddr,
		k.slashingKeeper.SlashFractionDoubleSign(ctx),
		evidence.GetValidatorPower(), distributionHeight,
	)

	// Jail the validator if not already jailed. This will begin unbonding the
	// validator if not already unbonding (tombstoned).
	if !validator.IsJailed() {
		k.slashingKeeper.Jail(ctx, consAddr)
	}

	k.slashingKeeper.JailUntil(ctx, consAddr, types.DoubleSignJailEndTime)
	k.slashingKeeper.Tombstone(ctx, consAddr)
}

The slashing, jailing, and tombstoning calls are delegated through the slashing module, which emits informative events and finally delegates calls to the staking module. For more information about slashing and jailing, see transitions.

# Parameters

The genesis parameters outlined in the Genesis Builder Script (opens new window) are as follows:

    # Consensus Params: Evidence
    genesis['consensus_params']['evidence'] = {
        'max_age_num_blocks': '100000',
        'max_age_duration': '172800000000000',
        'max_bytes': '1000000'
    }
	```

← Distribution Fee grant →